powerok connection on quicksilver
Posted by: errolflynn ()
Date: November 22, 2010 09:35AM


I have a problem understandng the instructions for the quicksilver mod. the instructions say

"You'll need to connect the +3.3v line to the Power OK line and insert these back into the harness."

does this mean that I splice a connection from an orange wire onto the green wire, and put both ends of the green wire back into the multipin connector at both ends in its original place?

Many thanks in anticipation


Goto: •Message ListSearchLog In
Sorry, only registered users may post in this forum.
This forum powered by Phorum.